Nitro Wall Scrubber NC71 Review

Average Reviews:

(More customer reviews)Updated note after three months of using the robot: It could not move after three months. However, the customer service was helpful to help diagnose the problem and asked me to ship it to Dallas for repair. It cost me $18 to ship from Houston, and the robot was returned in one week under working condition. Thanks to its two-years warranty instead of 90-days. If there is one complain, it would be that they should have a contracted repair service in every major metropolitan area, such as the 4th largest city, Houston. Because of the repair, I reduce its rating from five-star to four-star.
_______________________________________________I had used Polaris pool cleaners for years and found it has the following disadvantages: high electric bill from running a water pump; small bag capacity with frequent cleaning; frequent expenses for buying expensive replacement parts or repairs; and moderate durability (last about 3 years and then cannot be justified for repairing and forced to buy a new model with a trade-in rebate).
Thus, I switched to electrical pool robot which cost significant less by avoiding running a big water pump and has large bag capacity. In addition, it filters fine particles thru its bag and reduces the load and the frequency of cleaning pool filter compared to Polaris'.
I had tried three electrical pool robots: Aquabot Turbo T; Smart Pool's Kleen Machine; and Smart Pool's NC71 Nitro Wall Scrubber, by the sequence of usage.
I have used a digital timer with photocell to automatically turn on/off the robots. The timer works directly for the power supplies from Smart Pool. However, to make it run for Aquabot, you need to buy a different power supply (cost about $150), but I got it free from the store I purchased.
I found there are some advantages and disadvantages of the three robots:
1. Aquabot Turbo T: This is the most expensive robot I used, cost about $1,300 including taxes. Its main advantage is having large bag capacity so that you don't need to clean the bag as often as Polaris'. It comes with two large bags to filter different fineness particles. Its major disadvantage is it works for only about 18 months and need a replacement of motor which would cost about $900. Thus, I decided to try the other robot.
2. Smart Pool's Kleen Machine: I bought a brand new model from Costco with a cost of about $350. It has smaller bag capacity and a shorter length of wire than Aquabot. However, sometimes, the robot would clean only a small area. Finally, I decided to return it back to Costco with its generous return policy. A few weeks later I tried it again by purchasing a refurbished model from eBay which cost about $300, but it could not be turned on from the beginning. When I checked Smart Pool's website, I found that they don't make this model anymore. Thus, I asked the vendor to replace it with the following brand-new model.
3. Smart Pool NC71 Nitro Wall Scrubber Pool: It seems to be a model improved from Kleen Machine and uses fewer parts. It costs about $700s in about half of the cost of Aquabot. Its advantages are: costless to run without a need of water pump; filtering fine particles and reduce pool filter loading; super large bag capacity (unsure if it is bigger than Aquabot's); 60 feet long wire; two years warranty with less moving parts that seems to have longer durability; and DIY serviceability by video for repairs and parts. The other distinguished advantage is it can scrub much better than any other models for all nearly vertical walls with a continuous transition of surface. However, it still cannot climb to steps with no continuous transition of surface (no reviewed model can do this).
I have used Nitro Wall Scrubber for about a month, and I like it very much because it costs me less money and spend fewer efforts to maintain my pool. However, I am still unsure about its durability. Just in case it breaks, I hope the DIY video and parts may save me money and will not cost me an amount of money for buying a new one to repair it, such as the case of Aquabot.
I give it a rating of 5 stars based on about one month's experience by comparing it to the other models I used including Polaris's. However, I will revise the rating if I find it has any other unexpected problem such as short durability, etc.


Click Here to see more reviews about: Nitro Wall Scrubber NC71

Nitro Wall ScrubberTHIS NEW ROBOTIC CLEANER IS SMARTPOOL®'S FINEST UNIT. IT WILL CLEAN, VACUUM & SCRUB YOUR POOL LIKE NO OTHER ROBOTIC CLEANER.Put the Nitro TM Wall Scrubber to work in your pool and watch this dynamo go to work. Nitro® will quickly gobble up leaves, debris, sand & acorns and leave your pool clean & bright. Compare these quality features:Intelligent navigation does not require walls to change its directionRevolutionary design enables wider cleaning path for 50% faster cleaning coverageDual Direct-Drive Motors give the unit greater traction, more powerful suction & pinpoint navigation.Gel-Pro brushes will quickly clean vinyl, fiberglass & concrete poolsLightweight- weighs only 10 lbs so it is easier to remove from your poolQuick drain system- lets water drain out of unit quickly upon removal from pool 60' Super Cord is kink resistant Super capacity filter bag means less emptying Easily serviced by the user Runs on safe 12 volts. ETL, CSA & CE approved Eco-Friendly- uses very little power, costs just pennies to operate, and increases water conservation by reducing the need to backwash your pool!Back to Nitro In-Ground Pool Cleaners

Click here for more information about Nitro Wall Scrubber NC71