Arnold OEM-754-0367 MTD Snow Thrower Auger Belt Replaces 754-0367 Review

Average Reviews:

(More customer reviews)This belt worked great on my little snow blower. I could not find one local anywhere. I bought a spare incase it where's out but I don't think i will need it for awhile.

Click Here to see more reviews about: Arnold OEM-754-0367 MTD Snow Thrower Auger Belt Replaces 754-0367

The Arnold snow thrower replacement auger belt fits MTD 140 series single-stage snow thrower models 1995 and after.This is a replacement part for 754-0367. The auger belt replacement part comes with a one molded notch belt per sleeve. The belt is made of Kevlar and measures .375-inches in width.

Get 45% OFF

Click here for more information about Arnold OEM-754-0367 MTD Snow Thrower Auger Belt Replaces 754-0367

Oregon 98-049 Lawn Mower Blade For MTD 21-Inch 742-0741 Review

Average Reviews:

(More customer reviews)I went looking for a replacement for my Yardman lawnmower. After checking a local shop specializing in tractors and such, I felt that $23 for a replacement blade was too much. After looking at Sears, I found a blade but it did not have the STAR CENTER CUT that the original blade has.
I was very happy to find this blade here at such a low price. I actually ordered two based on the part number included in the description as well as the picture. The only issue is that the picture is incorrect. The replacement blade does NOT have the STAR CENTER CUT but has been made to circumvent this by using a wider opening (thus the 4 of 5 stars - it would be 5 stars if the picture was clearer and the description was written better i.e. "This blade does not have the STAR CENTER CUT but will fit your lawnmower regardless. The special cut allows for the blade to be attached properly with no worries").
I did install the blade and it DID fit nicely. No worries or safety concerns from what I can tell. I mowed the lawn and it cut perfectly on both bagging and mulching mode. Enjoy!


Click Here to see more reviews about: Oregon 98-049 Lawn Mower Blade For MTD 21-Inch 742-0741

Mulching blade.Fits MTD 1995 & newer decks.Also fits 300 & 900 series Cub Cadet walk behind mowers except models with cast aluminum decks.Specially designed center hole to replace six point star. Length: 21" Width: 2-1/4" Center Hole Diameter: 23/32" Star Thickness: .125" Diameter of Outside Holes: 19/64" Center to Center (outside holes): 2-1/2"

Get 3% OFF

Click here for more information about Oregon 98-049 Lawn Mower Blade For MTD 21-Inch 742-0741

Snow Thrower Paddle set For MTD 21" Snow Blowers 731-0782 731-0781 731-0780 721-0287 Review

Average Reviews:

(More customer reviews)New belt - $12,
New paddles - $19+shipping,
Able to launch the neighbor's frozen dog poop onto his roof - Priceless!
Now I'm waiting for the Spring thaw.
The paddles arrive quickly. Parts appear to be a correct fit, but I had to drill out 2 rivets and replace them with bolts as another reviewer mentioned. There was a bit of drag when turning the auger by hand after replacement. (I suspect that my auger is a bit warped.) So I had to trim a little rubber off the high spots. Now my snow blower works like new again.
BTW... Although I badly needed to replace the rubber paddles, the belt must have been also slipping (though the auger continued to rotate without any audible belt squeal) resulting in reduced auger speed. My chute would continually plug up. I picked up an OEM belt at a local hardware store. Replacing the belt made the real difference. No more chute plugging.

Click Here to see more reviews about: Snow Thrower Paddle set For MTD 21" Snow Blowers 731-0782 731-0781 731-0780 721-0287

Complete Paddle set contains 6 pieces 2 rectangles 1 1/2" x 3 3/8" and 4 Cresents 1 1/2" x 11 1/4"for the 21" MTD snow Wolf units

Click here for more information about Snow Thrower Paddle set For MTD 21" Snow Blowers 731-0782 731-0781 731-0780 721-0287

Troy-Bilt AH720R Trimmer Plus 16-Inch Dual-Action Articulating Hedge Trimmer Attachment Review

Average Reviews:

(More customer reviews)I purchased this trimmer after returning a Black and Decker that turned out to be defective. After being totally disgusted with the lack of quality in trimmers under $100, I started looking around to see what else was out there. I have a Ryobi click-link gas powered string trimmer and so this unit fits right on it. I decided to go for it. This unit is all metal (as in NO PLASTIC anywhere!) and has nice carbon steel blades. It easily cuts through 1/2 inch branches and will gnaw its way through 3/4 inch branches with minimum fuss. You can't stop it. I just trimmed 3 of my 12 foot tall Japanese maple trees and it never stalled once. I have it attached to a 31cc power head. The extra reach and swivel capability means I can easily reach the top of my trees from my ladder. The trimming job on those trees used to take hours with a long handled pruner. Now I can get it done in minutes. This tool is actually comparable to the Stihl hedge trimmer that sells for a lot more money. If you have a power head to put this tool to use, you can't go wrong. Other hedge trimmers in this price range aren't near the quality of this thing, and you don't need a cord to run it. If there is anything on the down side here, it would be the weight. It's a bit heavy to manuever for me so it would be very difficult for my wife to manage. This is no little ladies tool though so keep that in mind guys.

Click Here to see more reviews about: Troy-Bilt AH720R Trimmer Plus 16-Inch Dual-Action Articulating Hedge Trimmer Attachment

The Troy-Bilt dual action blade hedge trimmer attachment features 16-inch blades for smooth and quick cuts, and both blades are replaceable for maximum tool life. An articulating head improves the user's reach, and the wrap-around assist handle feels comfortable in the hand to make even big jobs feel easier. The attachment is covered by a 2-year limited warranty.

Click here for more information about Troy-Bilt AH720R Trimmer Plus 16-Inch Dual-Action Articulating Hedge Trimmer Attachment

Yard Machines 31A-32AD700 22-Inch 179cc OHV 4-Cycle Gas Powered Self Propelled Two-Stage Snow Thrower Review

Average Reviews:

(More customer reviews)This is the third snow blower I have owned, and does a great job in major drifts. But I have now ripped the starter cord three times, and disassembly and reassembly takes me almost an hour to repair it. In spite of several inspections, I can see nothing slicing the cord, but something us doing it. I suspect a metal burr somewhere.
All of that said, it starts dependably (when I haven't broken it), and makes short work of my driveway, even in densely packed snow. After a half season that has been especially rough, it all still seems sturdy and hasn't rattled itself apart, the way cheaper units have done in the past.

Click Here to see more reviews about: Yard Machines 31A-32AD700 22-Inch 179cc OHV 4-Cycle Gas Powered Self Propelled Two-Stage Snow Thrower

Powered by a 179 cc, OHV 4 cycle, MED Gold engine. 22'' clearing width with a 16'' intake and 10'' impeller. Manual EZ chute control. 1 forward speed control. Wheel driven by 10'' x 4'' SnowHog tires. 2 quart fuel capacity; oil included in engine. Standard skid shoes.

Click here for more information about Yard Machines 31A-32AD700 22-Inch 179cc OHV 4-Cycle Gas Powered Self Propelled Two-Stage Snow Thrower

1/2 X 35" Premium Belt. Replacement Belt for MTD 954-0101A, 754-0101A, 954-0101, 954-0101; Murray 581264, 581264MA; Ariens 72076, 07207600, 72156, 07215600; & More. Review

Average Reviews:

(More customer reviews)This belt is generic 0.5"X35" V-belt, which you can easily buy equivalent belt at ACE hardware. The problem is that the generic belt does not work for MTD single stage snow thrower. Single stage thrower uses the belt as a slip clutch & auger brake. Original MTD belt has more fabric than rubber at the friction surface to aid slippage when the auger drive bail is not pulled. But generic V-belt has more rubber because usually V-belt is not for slippage.
So, after a short uses (in my cases, about 4 hours), the belt wears quickly at one spot when the auger drive bail is not pulled.
Another problem is that the auger does not stop effectively. Because the friction at the engine pulley is so great, the belt keeps rolling even when the auger drive tension is released and brake is engaged. This is a safety issue.
In conclusion, don't buy this belt for MTD(Troy-Bilt, etc.)single stage snow thrower. I will check Lowe's if they sell the genuine MTD belt for less than MTD parts online.

Click Here to see more reviews about: 1/2 X 35" Premium Belt. Replacement Belt for MTD 954-0101A, 754-0101A, 954-0101, 954-0101; Murray 581264, 581264MA; Ariens 72076, 07207600, 72156, 07215600; & More.

Replaces 954-0101A and 754-0101A belt used on MTD snow blowers.

Get 14% OFF

Click here for more information about 1/2 X 35" Premium Belt. Replacement Belt for MTD 954-0101A, 754-0101A, 954-0101, 954-0101; Murray 581264, 581264MA; Ariens 72076, 07207600, 72156, 07215600; & More.

Yard Machines 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller Review

Average Reviews:

(More customer reviews)Hi- I'm not sure what issues the others have had with this machine, but it's awesome. I've been using the one I bought new for about 3 years now at my home and honestly it's been worked hard and a little abused... but it works as well as brand new. I use it to clear raw land by helping dig out roots, to help grade soil, to make new garden space, etc. My neighbor has seen the results & asked me where I got it. The only negative I can see is the lack of available attachments- I'd like to see an aerator, edger & dethatching attachment for it.

Click Here to see more reviews about: Yard Machines 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

31 cc, 2 cycle, 1 HP engine. 8'' diameter tines, (4) 6 point tines with forward tilling direction. 6'' to 10.25'' tilling width. 6'' wheels. Plow type folding handle for easy storage. Fully assembled. 2 year warranty.

Get 1% OFF

Click here for more information about Yard Machines 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

Yard Machines 11A-020B000 20-Inch 148cc Briggs & Stratton 300 Series Mulch/Side Discharge Gas Powered Push Lawn Mower Review

Average Reviews:

(More customer reviews)I bought this mower about 5 years ago. A single woman, I never paid attention to oil changes or maintenance schedules. Just a week ago, I though I needed a new machine when the cord got stuck and would not recoil. It motivated me to learn to do my own maintenance on the mower.
A clean, new air filter, a freshly sharpened blade and a new spark plug later with a healthy oil change proved to me how resilient this little machine is, and how sturdy it is. With its new parts and a good clean up, the little thing started working like new.
If it can endure my abuse, believe me, it is a good product! I mow an area of about 1/8 acre. Very, very happy with my machine that is still faithful to my yard.

Click Here to see more reviews about: Yard Machines 11A-020B000 20-Inch 148cc Briggs & Stratton 300 Series Mulch/Side Discharge Gas Powered Push Lawn Mower

Features a 148cc, Briggs & Stratton 300 series engine push mower. 20-Inch steel deck with side bag capabilities.

Get 22% OFF

Click here for more information about Yard Machines 11A-020B000 20-Inch 148cc Briggs & Stratton 300 Series Mulch/Side Discharge Gas Powered Push Lawn Mower