Showing posts with label sharpening. Show all posts
Showing posts with label sharpening. Show all posts

Wusthof Precision Edge Diamond Electric Sharpener Review

Wusthof Precision Edge Diamond Electric Sharpener
Average Reviews:

(More customer reviews)
I purchased this Wusthof Electric Knife Sharpener since I'm getting behind in keeping many of my kitchen knives sharp. I have used a GATCO 5pc Stone Sharpener Gatco Knife Sharpener for years to sharpen my kitchen knives since it uses a clamp on guide to sharpen any knife I own. However this electric sharpener is not as versatile as my Gatco or other electric ones that tell you they will handle Asian knives or boning knives that should be sharpened at a 15° angle. And you can't use the Wusthof for serrated knives. But for sharpening to a 19 to 20° angle for European or American chefs' knives, this Wusthof will handle it (and well). I wonder how much more it would have cost Wusthof to place another set of grinding wheels for a 15° angle? The help line at Wusthof tells me while I cannot use the sharpener on my Santuku knives I can use it on boning knives? Well, I don't buy that advice.
I like the fact that I run each knife between the slots between the two wheels. First the coarse wheel slot then the fine slot. Done. Next knife. Easy. But I have a tendency to pull the knife through the slot a bit too fast and the knife skips on the wheel just a bit. I guess the reason why I can't easily sharpen knives other ways is that by the time I sharpen one edge the other edge develops burrs. Sharpening both sides at the same time seems to be the easier way to get a sharp knife. I agonized just a bit over whether a hollow ground sharpened blade edge while sharper will lead me to keep sharpening or tuning the knife because others say that this type of edge tends to be weaker than a traditional edge (as the argument goes). So far, I have not found that to be the case.PROS:
Puts a hollow ground edge that is sharper than a traditional straight edge.
The Wusthof electric sharpener leaves a very sharp and very smooth edge on my knife, even smoother than with the sharpening stones of my Gatco.
I can sharpen or tune up my knife drawer full of knives in short time.
CONS:
Cannot use it to sharpen serrated, Asian (Santuku, Chinese Chef Knife), and I would add boning knives.
Tends not to sharpen about a quarter inch close to the heel of some knifes because of the design and placement of the interlocking wheels. But will you or I notice this when we use the knife? So far, I have not noticed it.


Click Here to see more reviews about: Wusthof Precision Edge Diamond Electric Sharpener

Great knives require great sharpeners.The Wusthof Precision Edge Diamond Electric Sharpener delivers a ultra sharp factory edge.The sharpener features interlocking diamond abrasive wheels.These wheels are crafted in the USA by Norton a long time leader in sharpening stones.These interlocking diamond wheels sharpen both sides of the knife at the same time quickly with minimal effort.The unit assures equal treatment of both sides of the knife blade for a true uniform edge.The Wusthof sharpener has two settings.The initial setting is for coarse grinding of nicked or damaged blades.The fine setting will easily restore you to a factory edge.

Buy NowGet 48% OFF

Click here for more information about Wusthof Precision Edge Diamond Electric Sharpener

Work Sharp WSKTS Knife and Tool Sharpener Review

Work Sharp WSKTS Knife and Tool Sharpener
Average Reviews:

(More customer reviews)
The Work Sharp WSKTS Knife and Tool Sharpener is exactly the sharpener that I've been looking for! It quickly and easily makes a good convex edge on most blades, and it only took me a few minutes to get the hang of it. I profiled and sharpened three kitchen knives in five minutes, and a brush axe in ten minutes. The brush axe took more time both because the new edge profile was a lot different, and because it took me some practice to deal with the curving blade.
Pros
- It takes me an easy 35sec to change a belt.
- The belts are lasting well.
- It takes about 5 passes each side w/medium belt to put a convex edge on a typical blade.
- It takes 1-2 passes each side w/fine belt to sharpen a typical blade.
- Works for most any blade, even my Benchmade folding knife with thumbstud.
- Sharpens hard knives.
Cons
- The instructions are not great. You may round the tip or ruin a blade's temper if you follow them exactly.
- It would be easier to draw through true if the guide extended to either side 1/2", and was solid above the belt.
- Will only sharpen the flat side of a serrated blade. You'll need something like a tapering round sharpener to get the other side.
- The thumbstud on a folding knife may get in the way unless it is near the handle.
- The fine belt is generally good, but sometimes I want finer. I searched online, but couldn't find any.
- There is no 15deg knife guide.
- The WSKTS quickly gets hot; you're not supposed to use it for more than 20min.
Tips
- Practice drawing the blade through with the motor off.
- As you draw through, change the angle of the blade to keep the belt-to-edge contact uniform.
- The belt will conform to the knife tip as you draw it though, which will round the tip of the knife. I avoid this by drawing through the same, but turning off the motor just as the tip of the knife reaches the belt.
- During the initial edge re-profiling, be careful that the knife doesn't get too hot, which will ruin the temper. I worked with three knifes at a time to avoid this.
- I alternate sides every pass, both to help keep the edge symmetric, and to minimize the number of passes.
- I only use the downward side of the belt; this seems safer and perhaps the belt will last longer.
- For a curving blade like a brush axe, I work in sections, being careful to vary and feather the sections each pass.


Click Here to see more reviews about: Work Sharp WSKTS Knife and Tool Sharpener



Buy NowGet 36% OFF

Click here for more information about Work Sharp WSKTS Knife and Tool Sharpener

DMT D8F 8-Inch Dia-Sharp Continuous Diamond Fine Review

DMT D8F  8-Inch Dia-Sharp  Continuous Diamond  Fine
Average Reviews:

(More customer reviews)
very fast sharpening stone,faster than water stones, it was my first DMT stone and I'm thinking about getting the extra fine, also I got it at a very good price

Click Here to see more reviews about: DMT D8F 8-Inch Dia-Sharp Continuous Diamond Fine

Quickly hone a razor-like edge with the uninterrupted diamond sharpening surface of this DMT 8" x 3" double-sided fine dia-sharp stone.This continuous diamond surface stone provides a cutting edge performance and is recognized for superior quality. Sharpening with diamonds is fast and easy.No oil is needed. You can sharpen dry or with water. Fine grit puts a keen edge on a regularly maintained edge. It is also great for water stone flattening.

Buy NowGet 30% OFF

Click here for more information about DMT D8F 8-Inch Dia-Sharp Continuous Diamond Fine