Average Reviews:
(More customer reviews)After reading all the reviews, I splurged and bought one of these newer units with the "Always ON" feature for an old 1800 sq/ft house. It worked great removing the horrible stench of a dead squirrel in one of the walls that lingered for weeks even after removing the carcass.
For the first week, it worked great. I decided to use the "Always ON" feature while I stayed at a friend's place for the weekend. I came back a day later and noticed it was not outputting any Ozone. The plate inside the unit was not lighting up usual purple so I contacted Sylvan, and they advised me to clean off the Ozone Plate. I opened it up, and noticed a fruit fly on the plate. I wiped it off with some rubbing alcohol and it revived the dead unit, but it was flickering on and off and parts of the plate were not lighting up. So they are sending me a replacement ozone plate which I told them I would replace myself.
I gave this product 3 stars, because when it works, it does a great job, but I believe the issues I had with this unit is due to lack of features. It needs a filter for the intake port to keep debris and insects from entering the intake port and shorting out the ozone plate. I believe it has a 400cfm fan, which will pull in a lot of air and particles through the unit.
If I can figure out it was in fact the fly that shorted the plate out and not the quality of the parts used inside, I may end up keeping it and customize it to suit me better like adding a filter and installing a different timer.
Also, Sylvan's customer service is First Class!
**UPDATE 8/1/10***
The unit is completely dead besides the fan. I opened up the unit, opened the case for the High Voltage Multiplier and I noticed a 22uF 400V capacitor had a nice hole in it. This is the reason why the Ozone Plate is not working and the reason why it was flickering before. The manufacturer of the capacitors are JakeC, which is a low quality brand from China.
I will try to replace the bad capacitor and see how it goes.
**UPDATE 8/14/10**
After replacing the bad 22uF 400V capacitor and the other one (for safe measure), it was still dead. Since most of the PCB and components were covered in epoxy, the only thing I could test were the two 13005 transistors mounted on the heat sink (metal lower panel). Both transistors were shorted so I replaced them with high quality parts (part# ST13005) and now it's back up and running. I ran it for a 24 hour cycle, and it's been running fine without issues.
Also, the front grill is starting to oxidize from the ozone after (3) 24-hour cycles, and (10) 1-hour cycles). I assumed it was stainless steel but now it doesn't appear so.
**UPDATE 8/17/10**
It has been running great and has been doing a good job even after running it for 48 hours straight. I contacted Sylvan about the repair I made, and they offered to compensate me for my time, which shows that they do care about their customers, but I did not accept.
**UPDATE 10/30/10**
My unit is still working well. I haven't had the need to use it as much, since it did a very good job initially by eliminating the odors that wouldn't go away. I use it maybe once a month to freshen the house and it still outputs huge amounts of ozone. For anyone not very familiar with Ozone Generators, especially ones that output this much ozone, they can be hazardous to your health so I would recommend only using it when there are no people/pets in the house (use with caution). When I walk into the house while the Ozone generator is running, I have a very difficult time breathing. Let the room air out for an hour or two and/or open windows after it has shut off.
I also want to add that long term use of this machine is not wise. I noticed after several uses, our 3 month old leather furniture ($2,500) is beginning to crack/oxidize in some areas (non-seating areas) from the initial "bombing".
Click Here to see more reviews about:
Sylvan Ozone Generator 3500mg/hr Ozone OutputOzone Generators are the only solution for reducing mold, mildew, odors, and bacteria.Need to remove mold caused by flooding? Look no further You have found the solution:Ozone Air Brand Generators are used by the professional fire and water damage restoration specialists around the world. When choosing a brand of ozone machines, why not place your trust in the same brand as the Pro's?Reduce Black Mold, Mildew, Odors, Bacteria & VirusesHighly reactive ozone is created by our ozone generator. Ozone is a colorless gas made up of three atoms of oxygen (Ozone Air). It is one of the strongest disinfectants in the world with 3000 times the germ killing power of chlorine.When ozone comes in contact with mold and mildew, pollen, odors, or other airborne bacteria, one of those atoms combines with the pollutants rendering them inactive by oxidation, leaving behind pure clean oxygen, (O3).This high output ozone generator (up to 3500 mg/hr) can help:reduce levels of airborne bacteria reduce black mold and mildew reduce fungi reduce mold spores reduce odors and viruses. The air is then much cleaner and healthier.Occasionally a generator is referred to as an air cleaner or an ozone purifier. Regardless of the terminology, rest assured our machines are highly effective air cleaners, especially when it comes to killing airborne mold, or toxic mold as it is sometimes called.Many ApplicationsOzone generators have many applications both commercially and around the home such as:Disaster recovery An ozone air cleaner is very effective when used in the clean up process following fires to get rid of the smoke odors, or in flood restoration to kill mold and mildew.An ozone generator is often used by cleanup crews following a fire to help recover items ruined by smoke damage.Experts in mold remediation use ozone generators to kill mold in the air either before or after demolition and reconstruction. Those experts turn to Ozone Air machines
Get 72% OFF
Click here for more information about Sylvan Ozone Generator 3500mg/hr Ozone Output
