GudCraft Leaf Mulcher Leaf-Eater Electric Leaf Shredder Review

Average Reviews:

(More customer reviews)It worked great for 2 bags of leaves and then the motor blew out despite circuit breaker (I was doing thick magnolia leaves though). I e-mailed the company through amazon and they replied right away and said I could return the item and they would give me a refund or they would send me a new motor. I opted for the refund and will try a different shredder.

Click Here to see more reviews about: GudCraft Leaf Mulcher Leaf-Eater Electric Leaf Shredder

GudCraft LM999 Leaf-Eater Mulcher/Shredder quickly recycles yard and garden waste into nutrient-rich mulch that's ready to be disposed of or reprocessed into compost. Powered by regular household current and featuring special positions for fine, medium, and coarse mulch, this handy tool reduces eight bags of leaves to just one bag, saving money on expensive trash bags and trash pickup.

Click here for more information about GudCraft Leaf Mulcher Leaf-Eater Electric Leaf Shredder

Patriot Products CSV-2515 14 Amp Electric Wood Chipper/Leaf Shredder Review

Average Reviews:

(More customer reviews)First off, it is not a gasoline engine so it is not going to have the same power due to the limits of amperage typical households can supply. However, even with these power limits I was very impressed with the power this electric chipper has. I was able to chip wood up to 2 inches in diameter with no problem except that the chipper pulls the wood into the machine faster than the machine can handle. So when chipping thick branches it is important to grasp them firmly and pull back when the chipper starts to pull them in too quickly. Be prepared, it pulls hard! If you are patient and feed at the correct rate you should not have any problems with clogs.
If the unit does clog the engine pulls too much power and your breaker will trip, which did happen to me a few times before I learned what the machine could handle. This chipper needs its own 20 amp dedicated circuit or it will trip the breaker when it starts. I live in an older house with older wiring that is mostly 15 amp, which could not handle the current. Luckily, the circuit my refrige is on is a 20 amp circuit that is close enough to a door so the extension cord can reach, but now I have to unplug the refrige when I want to run the chipper. (i'll fix this inconvenience by running a new 20 amp circuit to an exterior plug) So you should plan to put in a dedicated 20 amp circuit if you don't have one before you purchase this.
This chipper is very solidly built. If it does clog the plastic leaf bin is sturdy enough so that the entire unit can be upended to clear the chips, but it is heavy so be careful flipping it. The chipper cone isn't too hard to take off either in case wood gets stuck there. Since it is electric you just flip a switch to turn on and off, which is much more convenient than a gas engine. It is also much quieter than a gasoline engine, but you still should wear hearing protection when using it (no complaints from the neighbors so far).
The wood chips it produces are very fine, but the shredder doesn't work that well on green stuff. In fact, the shredder part is the easiest to clog. I tried a palm frond in the shredder opening and it clogged the machine. So now I just have to pull the fronds apart and put them through the chipper. It seems the shredder isn't much good for anything but dry twigs and leaves. But that is no biggie as it is not hard to feed most stuff into the chipper.
I bought this unit when I read the poor reviews for the cheaper electric chippers (free shipping if you order direct from their site). You get what you pay for. Patriot sells a quality machine that you can buy replacement parts for and that can be serviced. The other cheapo chippers don't even sell replacement blades! What do you do when your blade wears out? Don't buy a foreign-made piece of crap that you'll just end up throwing out. No regrets with my purchase.


Click Here to see more reviews about: Patriot Products CSV-2515 14 Amp Electric Wood Chipper/Leaf Shredder

Our most popular model! This Electric Chipper Shredder is the only one of its kind on the market today. Our unit will chip branches up to 2 1/2 inches in diameter. It is also ideal for shredding leaves. There are no hassles with gas or oil. It turns on with the flip of a switch. It can be used inside your garage, basement or hothouse. This environmentally friendly workhorse has no ugly fumes. It plugs into your standard 110 volt outlet. You will need a good heavy-duty extension cord of less than 100 ft as this unit draws 14 amps of electricity. The electric chipper shredder weighs less than 100 pounds and comes with large wheels for easy transport around your home and yard. See for yourself why this valuable yard and garden tool received the National Home Gardening Club Member Tested Seal-of-Approval. We are also excited to report that in the summer of 2009 our electric chipper was rated a "Best Buy" by Consumers Digest magazine. This honor is given to less than 3% of the products tested and our chipper has received this honor for a SECOND time. This unit comes complete with a 2-year warranty, a collection bag, and safety goggles.

Click here for more information about Patriot Products CSV-2515 14 Amp Electric Wood Chipper/Leaf Shredder

Flowtron LE-800 Leaf-Eater Electric Leaf Shredder Review

Average Reviews:

(More customer reviews)The unit was easy to assemble. It is a bit on the noisy side, as other reviewers have mentioned. Also, it is sometimes hard to get stable on a slightly slanted yard. If you are serious about doing leaf shredding, then you'll want to set the machine on top of a tarp and move it around the tarp as the piles of shredded leaves mound up under the machine.
The biggest downfall is how fragile it is: This is a leaf shredder only. It cannot handle even the smallest twig or branch without jamming or breaking the shredding devices inside. This was a big problem for me since its very difficult to 'screen' out every little branch before loading rake-fulls of leaves into the hopper. I got tired of having to constantly shut it down, unclog it due to some unshredded twig, restarting it, and then re-loading all the unshredded leaves, trying to screen out any twigs on the way.
Because of this I have since stopped using it.

Click Here to see more reviews about: Flowtron LE-800 Leaf-Eater Electric Leaf Shredder

The Flowtron LE-800 Leaf-Eater Mulcher/Shredder quickly recycles yard and garden waste into nutrient-rich mulch that's ready to be disposed of or reprocessed into compost. Powered by regular household current and featuring special positions for fine, medium, and coarse mulch, this handy tool reduces eight bags of leaves to just one bag, saving money on expensive trash bags and trash pickup.
Just Shred and Spread For a Beautiful YardTransform your yard into a showplace, without all the sweat and strain. With the help of its extra-large, 21-inch-diameter funnel, the Leaf-Eater effortlessly reduces wet or dry yard waste--including leaves and grass clippings--into nutrient-rich mulch or compost that you can reuse right in your flowerbeds or vegetable garden. With this efficient tool, creating a great yard is as simple as shredding and spreading!
Two-Step Process Shreds and MulchesThis system utilizes a two-step process that shreds and then mulches for fast cleanup and maximum waste reduction. Just feed double handfuls of material into the hopper and watch the Leaf-Eater do all the work.
Patented Design and Powerful Motor Shred Leaves FastThanks to its patented design, double heavy-duty cutting lines, and powerful universal motor with circuit breaker and reset button for overload protection, the Leaf-Shredder shreds wet or dry leaves, grass clippings, pine needles, and even paper as fast as you can load them.
Range of Shredding Adjustments for FlexibilityThis flexible shredder offers the convenience of a range of shredding adjustments from coarse to fine--up to 30:1 particle size-reduction. It also includes a sliding control lever that\'s easy to read, so you can choose the right setting for the job.
Lightweight Design for Easy PortabilityLightweight at just 16 pounds, the Leaf-Eater features a rugged, high-density polyethylene funnel and housing, as well as steel legs for long life and easy maintenance. Its lightweight design also means you can mount it atop a trash container that has a leaf bag inside for quick and convenient disposal.
Quick and Easy Assembly Right Out of the BoxOut of the box, the Leaf-Eater is a snap to put together in minutes; you'll only need a 3/8-inch nut driver and Phillips-head screwdriver. Maintenance is equally effortless thanks to the removable motor intake filter--just remove and clean periodically.
Dimensions and Warranty InformationThe LE-800 Leaf-Eater comes with 36 heavy-duty cutting lines, legs, and a limited one-year warranty.
About FlowtronFamily-owned since its start in 1920, Armatron International began operations as a manufacturer of automobile radios. After more than 50 years in that field, Armatron became recognized through its Flowtron division as a worldwide leader in outdoor products. Today, Flowtron designs, develops, manufactures, and sells a select line of lawn and garden products that are distributed to major retailers in the US and Canada, as well as to foreign markets all over the world. The company is proud that all of its products are made in the US: in Malden, Massachusetts, and Fort Wayne, Indiana.
What's in the BoxOne funnel, one upper hopper, one lower housing assembly, three legs, 36 cutting lines, one hardware package, and owner\'s manual.

Click here for more information about Flowtron LE-800 Leaf-Eater Electric Leaf Shredder

WORX WG430 13 amp Electric Leaf Mulcher/Shredder Review

Average Reviews:

(More customer reviews)I am a huge believer in creating compost and living in Oregon with an abundance of trees and leaves has led me to try a number of different products that mulch. I have purchased many combination blower-mulchers as well as stand-alone leaf eater (leaf shredder) electricity-driven products. I would like to share with you my review of the WORKX WG430 & compare it to the Flowtron LE-900 and to the McCulloch 14-AMP Electric Chipper/Shredder- MCS2001.
Pros:
All 3 pieces of equipment shred leaves sufficient to allow for mulching and ultimately composting. The WORKX is easily put together and this is so simple that the instructions are not needed. The assembled unit is stable despite some other reviews that it may not be so. The assembled unit is easily disassembled for better cleaning, for storage and to facilitate putting in new leaf-eater line. The Flowtron assembly is a little more involved but easily done. The assembled unit does not feel as sturdy as the WORKX but it is durable and the first Flowtron unit that I bought in 2007 lasted two years; it was the electric motor that died, and not any other part of the unit. I still have the McCulloch chipper-shredder. It has lasted over 5 years and shows no signs of impending demise. Therefore, I do not think that the construction, stability or assembly/disassembly of these units plays a major role in my choice of what the best unit is.
Cons:
The WORKX and Flowtron both generate a major amount of dust and the Flowtron is especially noisy. Definitely advise use of a face mask or some form of protection for the eyes and ideally the lungs (simple mask) when working with dry leaves. Ear protection is important as well. All units can emit (spit out) pieces of debris that could result in trauma to your eyes or any exposed soft tissue so safety should be a key issue when running these machines. Of the 3 units, the Flowtron is most offensive to the ears. Of the 3 units, the McCulloch emits the least amount of dust with the Flowtron and WORKX tied for a very distant second.
Inability to handle even small twigs is a major downside for the Flowtron and WORKX since both use filament line to act as leaf eaters. This is the same kind of line used in weed wackers. If you intentionally or inadvertently toss in twigs or even small branches into either machine the filament length is whittled down quite quickly and you will be inserting new line often. This is not a super simple task for either Flowtron or WORKX. On the contrary, the McCulloch handles branches and of course twigs, pine cones, etc very well. No problem there. The major downside of the McCulloch is the need to hand feed the leaves, twigs, or anything else that you are chipping or shredding. The Flowtron and WORKX allows you to grab large handfuls of leaves and quickly toss them into the unit. Not so with the McCulloch. If the McCulloch had this ability there would be no issue as to which machine to select.
The mulched product is the finest with the McCulloch, followed by the Flowtron with the WORKX the least impressive. The reason for this is that the WORKX has no way to adjust the opening for the shredded leaves; it is one size. The Flowtron has a sliding device that allows you to select a fine or coarse adjustment. Both the Flowtron and WORKX talk about the ability to shred moist leaves but I would tell you that although this is possible you end up after 5 minutes stopping the machine and scraping off a large amount of mushed leaf product and the trimmer line rapidly is eaten up as well. Same issue with the McCulloch but here you have not a problem with trimmer line but caking up of this mushy mulch on the inner walls of the machine that forces you to disassemble the McCulloch. The disassembly of the McCulloch is a time-consuming and not at all enjoyable procedure and if McCulloch could devise a quick release set up like the WORKX, this would be wonderful (assuming it to be safe).
I do not like that the WORKX has a two-pronged plug. I feel better with a 3-prong which is seen with the Flowtron and McCulloch.
Lastly, with the McCulloch you have 3 major working blades. These can be sharpened by the homeowner or new ones purchased online. These are not cheap but I have found it pretty easy to sharpen them myself so I do not consider this a major downside for this machine.
I just purchased another Flowtron after trying the WORKX and today have returned the WORKX for the reasons listed. I did a side-by-side comparison of the quality of the shredding and it was clear that WORKX allowed to many fully intact leaves to pass through without shredding.
Final conclusions: of the two leaf eaters, the Flowtron is clearly better. Of all three units, I would have to say that the McCulloch's ability to chip leaves, twigs, pine cones, seeds from cedars makes it my favorite. It just does not handle leaves as fast as the Flowtron. I have no connection in any way with any of these companies. Anyone that uses one or more of these products will find this review to be complete, clear and right on target. Lastly, I purchased and returned the WORKX via Amazon and purchased the FLowtron via Amazon on two separate occasions. I bought the McCulloch locally. I am very pleased with the delivery and return policy of Amazon.

Click Here to see more reviews about: WORX WG430 13 amp Electric Leaf Mulcher/Shredder

The WORX WG430 Leaf Mulcher is the all-in-one solution to an annual problem: piles and piles of leaves in the yard. It smartly disposes of heaps of leafy yard waste in a few simple steps, turning hundreds of gallons of rotting leaves into vitamin-rich, organic mulch that's a perfect fertilizer for your flowerbed or garden. The WORX Flex-a-Line bladeless mulching system uses normal, heavy-duty grass trimmer line instead of dangerous metal blades to easily and safely mulch through leaves and debris.
A Lean, Green, Mulching MachineShredding leaves with a traditional gas shredder/mulcher can disturb the environment with noxious air and loud noise. Thankfully, with the electric WORX Leaf Mulcher, you can put the 'green' back in 'green thumb'.
Showcasing a powerful 13 Amp motor that delivers 8,500 RPMs, the WORX Leaf Mulcher will reduce a mass of dead leaves and twigs to 1/11th of its original size. That means you won't be lugging 11 bags of whole leaves to the curb for distribution or disposal--instead, you'll only have to worry about a single bag.
With the WORX Leaf Mulcher's 13-inch cut diameter and oversized mouth, you can mulch up to 53 gallons of leaves per minute. Acres of dried leaves can be collected and pulverized into manageable mounds of mulch in practically no time at all.
Create Mulch and CompostIt is estimated that almost 25% of the urban waste stream is made of yard waste and debris. In the fall, it can account for more than 60% of what flows into your local landfill.
The WORX Leaf Mulcher actually transforms your yard's dead leaves and debris, which would normally end up in a landfill, into vitamin-rich mulch and compost that can be recycled into your garden or flowerbeds.
Shredded leaf mass furnishes nutrients that assist in new plant growth during the growing season. Furthermore, mixing mulch into your garden and flower beds will aerate the soil and encourage new growth. Additionally, leaf mulch will increase water retention in the soil, reducing watering time and saving money.
Compact, Versatile, and Easy to UseAt less than 20 pounds, the WORX Leaf Mulcher features a compact design, in which the disassembled parts nest neatly together for convenient off-season storage on a shelf in your shed or garage. Setup takes only a few minutes, with absolutely no additional tools required!
In addition, the mulcher features a dust-reducing clean-air motor cooling system. Air and mulched leaves are separated through an external cooling air intake and exhaust to significantly reduce dust generation.
For further convenience, The WORX Leaf Mulcher's safe Flex-a-Line bladeless mulching system features tool-less cutting line replacement and a universal bag holder that accepts both paper and plastic bags. To top it off, an oversized on/off switch allows for easy, hassle-free operation.
The WORX heavy-duty Leaf Mulcher is the one machine that will end hours of misery once and for all and will make fall cleanup fast and easy!
What's in the BoxWORX WG430 Leaf Mulcher, 24 replacement lines, and one universal bag holder.

Get 24% OFF

Click here for more information about WORX WG430 13 amp Electric Leaf Mulcher/Shredder

Black & Decker LH4500 12 amp 2-Speed Electric Leaf Hog Blower / Vacuum with Leaf Bag Review

Average Reviews:

(More customer reviews)I wanted to love this Leaf Hog. For the first day I owned it, I did love it. The honeymoon is now over though, and not everything is quite as rosy as I thought. Here's where we stand:
Pros:
-----
1) Mulches leaves very effectively
2) No significant problems with clogging
3) Lightweight, easy to maneuver
4) Easy to switch between blower/vacuum
5) Inexpensive
I primarily bought this to help me turn leaves into leaf mulch. It does that quite well. I now have nearly 2 cubic yards of well-shredded leaves to use as mulch and throw in the compost pile. I thought it was simple to put together, and it's easy to operate.
Cons:
-----
1) Collection bag is of very poor quality
2) Motor is obnoxiously loud
3) Some parts don't fit well
4) Vibration is excessive, and can cause health problems
Bad news...the collection bag developed a hole and some tears the second time I used it. The bags run $15-$20 or so. If I had to replace one each season, I might not be so upset. But at this rate I'll be spending more on bags every year than the initial cost of the blower itself. Unacceptable.
And this sucker is _loud_. It's not really a problem for me since I wear good hearing protection while operating machines like this, but I do worry that I'll annoy my neighbors if I use it frequently.
While it was easy to put together, the plastic tube that attaches to the motor housing fits poorly. Lots of dust and some other larger debris flies out of the mating surface where the pieces don't meet tightly enough.
The biggest negative of this product _for me_ is that the vibration is excessive. What's the big deal if it vibrates too much, you ask? Besides being uncomfortable to hold, it can actually lead to problems with the nerves in the hands and arms. There's something called Hand Arm Vibration Syndrome (HAVS) that can develop with repeated usage of tools like this. I'm not exactly sure what happened in my case (I don't believe I have 'HAVS'), but twice when I used it my hands and fingers became numb for an extended period of time. By "extended period" I mean 2-3 days. Now I just set it on the ground next to a pile of leaves and guide the leaves into the tube. Works fine.
If I can find the receipt, I'm thinking about returning this due to the defective/low-quality collection bag. If I do so, I might try the similar Toro Ultra 12 Amp Variable Speed Electric Blower/Vacuum With Metal Impeller #51599 which supposedly is much quieter -- and hopefully vibrates less as well.
I don't think this Black & Decker is a bad product. It works great, and it does so without a lot of pizazz or polish. Given the price, I can't really complain about how it performs. Obviously something about my physiology isn't compatible with the vibrations it produces, but I don't expect this to be a problem for most people.

Click Here to see more reviews about: Black & Decker LH4500 12 amp 2-Speed Electric Leaf Hog Blower / Vacuum with Leaf Bag

The Black & Decker Leaf Hog Electric Blower/Vacuum adds versatility and power to your tool collection. As a blower, the Leaf Hog can generate up to 240-mph air speed to clear matted leaves or sweep hard surfaces. Switch to the vacuum function, and the mulching mechanism devours and deposits up to 16 bags' worth of debris into the included rear bag.
Clears All Types of DebrisSweep your patio, workshop, or walkway clean, or use the 240-mph air speed to make quick work of wet, matted leaves in your yard. The Leaf Hog has a dual-speed switch to decrease air flow when you're working around delicate flower beds, patio furniture, or automobiles in your garage.
Gather and Mulch Leaves and TrimmingsThe Leaf Hog converts easily to a 385 CFM lawn vacuum when you want to collect loose leaves, twigs, and grass clippings. The internal mulching mechanism grinds everything down, compressing as much as 16 bags of debris down to one. The included bag detaches easily to empty your mulch in flower beds, gardens, or compost piles.
Lightweight for Comfortable, All-Day UseAn included shoulder strap adds extra support when you're using the Leaf Hog. Weighing in at just 8.1 pounds makes the blower/vacuum light enough for anyone to use for extended periods.
Low Noise Levels from the Environmentally Friendly MotorPower comes from a 12 Amp motor than runs on electricity--no need to mix oil and gasoline when you're ready to work. The electric motor greatly reduces the roar that's common with gasoline blowers to protect your hearing and reducing noise pollution.
The Electric Leaf Hog Blower/Vacuum is covered by a two-year warranty.
What's in the BoxLeaf Hog Electric Blower/Vacuum, tube with LeafBlaster nozzle, vacuum attachment with tube, leaf bag with zipper, adjustable shoulder strap, air concentrator

Get 49% OFF

Click here for more information about Black & Decker LH4500 12 amp 2-Speed Electric Leaf Hog Blower / Vacuum with Leaf Bag

McCulloch MCS2001 14 amp Electric Chipper/Shredder Review

Average Reviews:

(More customer reviews)Summary:
Works well for my purposes, which include a lot of twigs, leaves, brush, and ½" to ¾" sticks. The mulch produced is much finer than I expected, and is really smaller than your typical double-shredded commercial mulch. Assembly took 1½ hours, and was pretty straightforward, but no thanks to the instructions supplied with the unit. For the price, this is a very good unit.
Shipment:
Unit came 2 days after I ordered. Surprised at the speed for free shipping, but I noticed Amazon used 2nd day UPS air. I don't know if this was expedited shipping because of the nearness of Xmas, but I was very pleased with the timeliness.
Assembly:
Instructions that came with the unit were very sparse and provided very limited illustrations and narrative to help the consumer. A clear and detailed picture or diagram would help a lot.
However, after staring at the photo on the box, and looking at the various parts that came in the box, assembly was simple enough for my son and I (you really need 2 people). Thinking back on it, here is the sequence that should be followed (little of this is in the instruction manual):
1. First start with the leg, axle, and wheel assembly. Look at the axle, and you will see two hex bolts with no apparent purpose screwed into the axle: one at each end. These are adjustment blanks that should be moved in order to properly align the leg, axle, and wheel assembly to accept the body of the shredder. You will notice an empty threaded hole immediately adjacent to these hex bolts, each a bit closer to the ends of the axle. Unscrew the hex bolts using the provided hex-key and move them to the adjacent holes that are closer to the end of the axle.
2. Place one wheel on the axle and secure with the supplied large flat washer followed by a cotter pin. Bend the end of the cotter pin around the axle end to secure the wheel. Do not put the other wheel on the axle yet, and don't put on the McCulloch wheel covers on either wheel yet.
3. Thread the end of the axle through the opening on one leg (it doesn't matter which one - they are symmetrical), and then use the supplied long hex bolt, lock washer and flat washer to loosely secure (hand tighten) the part of the axle closest to the attached wheel against one leg. The lock washer should be placed on the bolt first (closest to the bolt head) followed by the flat washer, then thread the bolt through the outer curved part of the leg into the threaded hole in the axle which is closest to the wheel that you put on in step 2.
4. Take the other leg and attach it to the other end of the axle using the remaining long hex bolt, lock washer, and flat washer -- hand tighten.
5. Take the remaining wheel and secure it on the remaining axle end with the supplied large flat washer followed by a cotter pin. Do not put either wheel cover on until the end (just in case you did something wrong or you aren't quite satisfied with the alignment).
6. Insert the solid aluminum barrels (each with two smooth-bore holes) into the end of the leg, axle, and wheel assembly that will mate with the shredder body. Line up the barrel holes with the leg holes. This provides strength at the connection point to the body. Put the leg, axle, and wheel assembly aside for the moment.
7. Now let's work on the body. Using two persons to lift, stand the shredder body up on the flat pieces of cardboard supplied in the box. Unscrew the three black plastic-knobbed hand bolts that retain the yellow metal hood onto the black shredder assembly. Remove the yellow metal hood and put it aside. You have now exposed the heads of the four hex bolts used to secure the shredder body to the leg, axle, and wheel assembly.
8. Using the stronger person to lift, place the black shredder assembly over the leg/axle/wheel assembly, and line up the two holes on either leg (four holes total), with the four hex bolts on the black shredder assembly. Have your partner guide the bolts through the holes. From the underside, secure the bolts using the supplied flat washers, followed by lock washers, followed by nuts -- hand tighten. Don't put the hood back on yet.
9. Eyeball the entire assembly to see that is aligned vertically and horizontally. Since you only hand-tightened the axle-leg and leg-body hex bolts, it is now pretty easy to adjust the alignment by simply moving the body relative to the legs, or moving the legs relative to the axle. Don't worry, the set-up is pretty sturdy, it would be difficult to harm anything by pushing or pulling to gain proper alignment.
10. Once you are satisfied with the alignment, tighten the two leg-axle hex bolts and four leg-body bolts using the supplied hex wrench. Use rotation tightening like you would when working on your car. Half tighten bolts on opposite ends, then ¾ tighten, and then full tighten.
11. Snap on the McCulloch wheel covers on the wheels.
12. Place the yellow metal hood back on top, and tighten the black plastic-knobbed hand bolts.
13. Place the black plastic leaf and twig receiving chute on top of the yellow metal hood, and line up the five small bolt holes. The ribbed side of the receiving chute should be facing toward the wheels. Insert and tighten the five bolts to secure the chute.
14. Turn off the switch before you plug in the shredder.
Operation:
1. For brush and sticks under ¾" this unit rocks! I am quite pleased how quickly this shredder takes the little stuff and spits out very finely shredded mulch.
2. For brush and sticks 1" to 1½" - be careful! It is very easy to jam this unit by feeding big twigs too quickly. After jamming the unit, you need to turn it off, unplug it, remove the yellow metal hood by undoing the three black plastic-knobbed hand bolts, and then clearing the debris from the cutting blades or the large stick feeding tube on the yellow hood. I have found that the best approach is to feed twigs of this size using a feed a little, pause a little, feed a little, pause a little approach. You can actually do this pretty quickly once you get used to what the machine can handle as far as pace.
3. Leaves mixed with sticks seem to shred finer than leaves by themselves through the top chute.
4. Twigs by themselves, regardless of size, are consumed most quickly through the side feeder tube versus the top chute.

Click Here to see more reviews about: McCulloch MCS2001 14 amp Electric Chipper/Shredder

Take care of yard waste and do your part to protect the environment with the eco-friendly McCulloch MCS2001 14-Amp Electric Chipper/Shredder. Featuring an ETop hopper design and a three-way feed, this handy tool makes quick work of twigs, branches, and other debris. It can even save time and money by allowing you to make your own mulch.
14 Amp Induction Motor and Three-Cycle Shredding System for Fast ResultsComplete with a 14 Amp induction motor that offers a peak power of 2.5 HP, the MCS2001 makes quick work of small branches and tree limbs with a diameter measuring up to 1.5 inches, as well as leaves and brush. Its three-cycle shredding and mulching system ensures consistent, quality results, even after repeated use.
Straightforward, User-Friendly OperationThe MCS2001 is incredibly easy to use. Simply turn the machine on with a quick flip of the switch, and in just a few seconds the MCS2001 reduces yard waste to a pile of finely shredded wood that you can dispose of or re-purpose as mulch.
Safe, Eco-Friendly Design Protects Fingers and the EnvironmentDesigned with safety in mind, the MCS2001 boasts a patented top hopper design and tamper that keeps fingers away from the V-type blade at all times. And because it's powered by electricity, it offers quieter, cleaner operation and avoids the mess and pollution of gas.
Seven-Inch Wheels for PortabilityEfficient, easy to assemble, and user-friendly, the MCS2001 includes seven-inch wheels for portability and maneuverability, and a rounded discharge chute that's a snap to clean. For added convenience, the chipper is compact enough to store in a home shop or garage, and it is backed by a two-year warranty (90 days for commercial use).
McCulloch: An Industry Leader in Technology, Innovation, and ValueAn industry leader in the development of technology, quality, function, ergonomics, and design of outdoor maintenance tools for over 60 years, McCulloch has established an unrivaled, worldwide reputation for reliability and value. Founded in 1946, McCulloch rapidly moved to the forefront of two-stroke petrol engine design, growing into one of the world's leading manufacturers of chainsaws, trimmers, brushcutters, and hedge cutters.
What's in the BoxChipper, tamper, manual, and warranty card.

Click here for more information about McCulloch MCS2001 14 amp Electric Chipper/Shredder

Flowtron LE-900 The Ultimate Mulcher Electric Leaf Shredder Review

Average Reviews:

(More customer reviews)This is a leaf shredder - not a mulcher. It is a sting trimmer inverted with a funnel on top. I used this to shred all my fall leaves - works great. My wife would load them and I would give it a bit of a stir with a stick. Shaking the unit back and forth will get small sticks to fall through without killing the strings.
Don't abuse it and it will work great. Forget what its purpose is and you will get grumpy and write negative reviews on Amazon. Leaf mulch went well on our beds, some of our plants didn't even die back - they were nice and toasty warm under their 4 inch blanket of shredded leaves. Just had to play the guessing game of when to remove some of the mulch to let the plants grow. Too soon and the spring frost will get them. Too late and they will end up stringy. I love my shredder. My in-laws will be getting one soon.

Click Here to see more reviews about: Flowtron LE-900 The Ultimate Mulcher Electric Leaf Shredder

Flowtron\'s LE-900 Leaf-Eater Mulcher/Shredder quickly recycles yard and garden waste into nutrient-rich mulch that's ready to be disposed of or reprocessed into compost. Powered by regular household current and featuring special positions for leaves (coarse to fine), grass, thatch, and pine needles, this handy tool reduces 11 bags of leaves to just one bag, saving money on expensive trash bags and trash pickup.
Just Shred and Spread For a Beautiful YardTransform your yard into a showplace, without all the sweat and strain. With the help of its extra-large, 21-inch-diameter funnel, the Leaf-Eater effortlessly reduces wet or dry yard waste--including rain-soaked leaves and grass clippings--into nutrient-rich mulch or compost that you can reuse right in your flowerbeds or vegetable garden. With this efficient tool, creating a great yard is as simple as shredding and spreading!
Two-Step Process Shreds and MulchesThis system utilizes a two-step process that shreds and then mulches for fast cleanup and maximum waste reduction. Simply feed double handfuls of material into the hopper and watch the Leaf-Eater do all the work.
Patented Design and Powerful Motor Shred Debris FastThanks to its patented design, double heavy-duty cutting lines, and powerful universal motor with circuit breaker and reset button for overload protection, the Leaf-Eater shreds wet or dry leaves, thatch, grass clippings, pine needles, and even paper as fast as you can load them.
Use the elastic bungee cord to hold your leaf bag in place, or place the Leaf-Eater atop your trash container (with a leaf bag inside) for mess-free disposal. Additionally, the Leaf-Eater's adjustable pressure knobs allow positioning of the hopper to any angle for easier loading; the hopper also rotates 180 degrees for compact storage.
Range of Shredding Adjustments for FlexibilityThe Leaf-Eater offers the convenience of a range of shredding adjustments from coarse to fine--up to 30:1 particle size-reduction. A sliding control lever that\'s easy to read allows you to choose the right setting for the job.
Lightweight Design and Built-In Carrying Handles for Easy PortabilityLightweight at just 17 pounds, the Leaf-Eater features a rugged, high-density polyethylene funnel and housing, as well as steel leg construction for long life and easy maintenance. And for true portability, built-in carrying handles allow this unit to go where you go.
Quick and Easy Assembly Right Out of the BoxOut of the box, the Leaf-Eater is a snap to put together in minutes; you'll only need a #2 Phillips-head screwdriver. Maintenance is equally effortless thanks to the removable motor intake filter--just remove and clean periodically. The Leaf-Eater also features a convenient built-in storage compartment to hold replacement cutting lines, gloves, and safety glasses.
Dimensions and Warranty InformationThe LE-900 Leaf-Eater measures 19.5 x 19.5 x 23.0 inches (WxHxD) and comes with legs, 36 heavy-duty cutting lines, and a full, one-year warranty.
About FlowtronFamily-owned since its start in 1920, Armatron International began operations as a manufacturer of automobile radios. After more than 50 years in that field, Armatron became recognized through its Flowtron division as a worldwide leader in outdoor products. Today, Flowtron designs, develops, manufactures, and sells a select line of lawn and garden products that are distributed to major retailers in the US and Canada, as well as to foreign markets all over the world. The company is proud that all of its products are made in the US: in Malden, Massachusetts, and Fort Wayne, Indiana.
What\'s in the BoxTwo funnel halves, one housing assembly, two legs, one hardware package, 36 cutting lines, and owner\'s manual.

Click here for more information about Flowtron LE-900 The Ultimate Mulcher Electric Leaf Shredder

Wood Chipper Leaf Shredder Collection Bag Review

Average Reviews:

(More customer reviews)this product arrived quickly and as advertised, it is a great deal for the price based on my searches.

Click Here to see more reviews about: Wood Chipper Leaf Shredder Collection Bag

This bag is great for anyone who is chipping wood or shredding leaves and vegetation. Simply connect the bag to the discharge of your wood chipper or leaf shredder. Processed material is conveniently collected in the bag so that it can neatly and easily be moved to where it is needed.

Click here for more information about Wood Chipper Leaf Shredder Collection Bag

Swisher Vacuum Hose Wand Attachment Kit 10756 Review

Average Reviews:

(More customer reviews)I was pleased at first at the ease of use, but then the hose kept getting
loose or coming off completely! The "compression" band is not the best method of clamping a corrugated hose. The second time I used it the plastic under the handle completely broke out. Now I have to hold the hose with my hands to vacuum with it. Very cheap design especially considering what I paid. The Swisher vacuum itself works great but this hose extension kit is a poor buy. I would not recommend it.

Click Here to see more reviews about: Swisher Vacuum Hose Wand Attachment Kit 10756

The Swisher vacuum hose and wand attachment kit works with your Swisher lawn vacuum to pick up clumps of leaves and grass effortlessly. The hose is lightweight and features a long wand with easy-to-grip handle, allowing you to stand up comfortably while directing the hose. The hose is 15 feet in length and 4 inches across. This product attaches easily to the Swisher Lawn Vac with a single clamp, and comes with a hose adapter to convert from 6 to 4.

Click here for more information about Swisher Vacuum Hose Wand Attachment Kit 10756