Average Reviews:
(More customer reviews)If you suspect you have a bad primer bulb or leaking fuel lines, this kit works well. To install the kit, remove air filter housing and carburetor. Make a drawing of where fuel lines go -- it is not intuitive once everything is disassembled. (I read suggestions from people that said to use a certain size wire to pull new fuel lines through the tight-fit holes in the fuel tank, but could not get this to work.) The fuel lines in the kit are split just right at one end to make the job easier, so I came up with this procedure: Cut old fuel lines off as close to tank as possible, push what remains into the EMPTY fuel tank. Remove fuel cap and shake out the remaining fuel line and filter. Do the same for the return line. Feed 20-gauge electric wire through one of the fuel line holes and out the refuel opening. Tightly tie thin string (kite string works) to the wire, then pull it back through the small hole in the fuel tank. Now, make a tight knot with the other end of the string close to the end of the split fuel line, and pull the new fuel line through the tank and out the small hole. Do both lines -- one is for fuel return. Carefully pull out the new fuel line until the opposite end is well into the tank. (The return line does not need much line inside the tank, as you will see when you remove the old fuel line.) Remember to add the fuel filter and return line end before the fuel line disappears into the fuel tank. Finish by reassembling with the new primer bulb. If the primer bulb pumps fuel from fuel tank and holds it, you did a great job. If it does not work, try reversing fuel lines -- it is easy to get them mixed up. The kit has all the parts for replacing fuel lines, primer bulb and fuel filter. If bad fuel lines and/or primer bulb is the problem with your blower or trimmer, this kit will fix it. Note: It can be tough to get the carburetor, air cleaner housing, fuel lines, and throttle cable all correctly aligned at the same time when reassembling. Be sure that fuel lines are not pinched between carburetor and engine.
Click Here to see more reviews about:
Primer Bulb Repair Kit.. Fits Craftsman, Poulan, Homelite, Green Machine, Red Max and Other Weedeaters and Blowers. Kit Contains Walbro Carburetor 188-13 Primer Bulb, Fuel Lines and Universal Tank FilterGet a new primer bulb and the three most common fuel line sizes plus a universal tank filter without having to buy rolls and rolls of fuel line and parts! You get a new Walbro 188-13 Primer Bulb overall dia 15/16" x 5/8" H (measure your old primer bulb). You get 14 inches of.080" ID.140" OD fuel line (small) and 14 inches of 3/32" ID 3/16" OD fuel line (medium) and 14 inches of 1/8" ID 1/4" OD fuel line (large), plus a universal tank filter. There is enough fuel line to do two jobs in our Repair Kit; and it's Tygon fuel line the best in the industry! Fits: Poulan, Craftsman, Snapper, Homelite, Green Machine, Red Max, Ryobi, IDC, Robins, Husquvarna, MTD, John Deere and 99% of the rest. Repairs Chainsaws, Blowers. Trimmers and Weed eaters. Fuel line comes with one end specially cut for easy installation through the holes in the tank using tools like needle nose pliers to pull out the extra fuel line through the gas cap area.
Get 49% OFF
Click here for more information about Primer Bulb Repair Kit.. Fits Craftsman, Poulan, Homelite, Green Machine, Red Max and Other Weedeaters and Blowers. Kit Contains Walbro Carburetor 188-13 Primer Bulb, Fuel Lines and Universal Tank Filter
